NanoVapour
kills airborne pathogens
and sanitise all surfaces
– NanoVapour disinfectant fills enclosed spaces, killing airborne pathogens and pathogens on all the surfaces.
– NanoVapour drifts in underneath and in behind heavy equipment, reaching areas that are normally unreachable.
– NanoVapour sanitises high and difficult to reach surfaces that normally requires ladders or scaffolding.
– A microscopic thin layer of NanoVapour settles underneath, on top and on the sides of all surfaces.
– The layer of NanoVapour is so thin that no water droplets form. It kills pathogens and then evaporates, leaving no trace.
– No rinsing is required afterwards.
– NanoVapour saves more than 90% on chemicals, water and power consumption compared to conventional sanitising.
* IMPORTANT TO KNOW:
Most “thermal” foggers renders water-based disinfectants useless.
Because our FoggerTech machines generates NanoVapour COLD fog, it works with all water-soluble disinfectants.
Industrial Humidification
True Dry Fog – No Wetting
The same NanoVapour technology that powers our disinfection systems also delivers precision industrial humidification — but … without the wetting.
FoggerTech generates droplets under 1 micron, far finer than the 10–50 micron output of conventional misting. By the d²-law of evaporation, evaporation time scales with droplet diameter squared: our droplets evaporate up to 100x faster than 10-micron mist, absorbing directly into the air instead of settling on floors, stock, or equipment. Ultra-low settling velocity keeps the fog airborne, delivering rapid, uniform humidity throughout the space.
This is true non-wetting dry fog. Perfect for food processing, textiles, paper, printing, electronics, woodworking, cold rooms, and warehousing wherever moisture sensitive products and equipment cannot be exposed to surface moisture.
An integrated RH sensor and controller provide closed-loop humidity control, automatically maintaining your setpoint with minimal operator input — cutting static electricity, protecting materials, and keeping production conditions consistent.
Same trusted FoggerTech hardware, with precision humidity control and without wetness.
NanoVapour vs other foggers & humidifiers
| FoggerTech Dry Fog vs. other humidification methods | FoggerTech | Atomizers & Misting | Steam (Thermal) | High-Pressure Spray |
|---|---|---|---|---|
| Droplet size smaller than 1 micron (See note 1) | YES | NO (10–50 microns) | N/A (pure vapour, no droplets) | NO (10–20 microns) |
| True non-wetting fog — no surface moisture, no condensation (See note 2) | YES | NO (surface and equipment wetting is common) | YES (but mineral carry-over can deposit scale) | NO (wetting close to nozzles) |
| Evaporates before settling — rapid, uniform 3-dimensional coverage (See note 3) | YES | NO (large droplets fall before fully evaporating) | YES (already vapour) | NO (droplets fall before fully evaporating) |
| Automatic closed-loop RH control via integrated sensor (See note 4) | YES | NO (typically manual or basic on/off) | YES (standard on most steam units) | NO (typically manual or basic on/off) |
| Low energy consumption & running cost (See note 5) | YES | YES (low–medium) | NO (boiling water is energy-intensive; up to 5x FoggerTech's running cost) | NO (high-pressure pump draws significant continuous power) |
| Effective static electricity elimination | YES | PARTIAL (uneven distribution limits effect) | YES | PARTIAL (uneven distribution limits effect) |
| Low maintenance — no boiler, no scale buildup | YES | NO (nozzles prone to clogging) | NO (boiling elements/cylinders need regular descaling or replacement) | NO (high-pressure pumps & nozzles need regular servicing) |
NOTES:
- Droplets smaller than 1 micron evaporate almost instantly, obeying the d²-law of droplet evaporation: evaporation time scales with the square of droplet diameter. A 1-micron droplet evaporates roughly 100x faster than a 10-micron droplet, converting to water vapour before it can wet a surface.
- Because FoggerTech droplets evaporate rather than fall, no water accumulates on floors, stock, packaging or equipment — critical for moisture-sensitive products and electronics.
- The exceptionally low settling velocity of sub-micron droplets keeps the fog airborne long enough to distribute evenly through the full volume of a room, not just where it is sprayed.
- An integrated relative-humidity sensor and controller continuously monitor conditions and modulate the FoggerTech system to hold a precise RH setpoint automatically, with minimal operator intervention.
- Steam humidification is effective but energy-intensive, since it relies on boiling water; dry-fog systems achieve the same humidity result using a fraction of the energy and without CO2-generating heat.
GALLERY
Nano-Shield
The disinfectant that redefines sanitation & health-care
Meet “Nano-Shield” – Our groundbreaking disinfectant that is as innovative as our “Nano-Vapour” fogging technology.
Scientific tests have proven that it is food-safe and poses no health risk when inhaled, enabling operators to use it with our FoggerTech machines without fear of respiratory system damage.
It eliminates bacterial, viral and fungal pathogens, not only on surfaces and in the air. When inhaled, it eliminates pathogens BEFORE causing infection.
It activates the body’s natural innate immune response. This early immune response is vital in preventing infections in the respiratory system.
Because the droplets are nano-sized, the healing properties of Nano-Shield are delivered in the bronchioles and deep into the alveoli of the lungs, making it a game-changer in respiratory healthcare.
Already infected? Nano-Shield has been tested to reduce existing inflammation in the lungs, which is critical for restoring respiratory health and mitigating the effects of infections.
Because it kills pathogens in the air, scientific tests have shown that Nano-Shield prevents the transmission of viruses, (like the avian flu) which is transmitted in the air from infected birds to healthy birds.
Nano-Shield is eco-friendly. It breaks down into natural elements, leaving no harmful residues.
“Prevention is better than cure”
Keep yourself, your loved-ones (and your chickens) healthy. Nano-Shield is the perfect prophylactic treatment of your environment, preventing viral & bacterial infection and fungal growth, without any harm to human, animal or bird respiratory systems.
FoggerTech’s “Nano-Vapour” machines with “Nano-Shield” disinfectant is the perfect combination, providing healthy sanitation, not only on hard-to-reach surfaces, but also in the air.
Breathe freely, in a healthy environment
NanoVapour
GENERATORS
FoggerTech offers a range of NanoVapour generators depending on the volume of the area to be sanitised.
Our equipment is reliable and very easy to use. Even our largest model fits through a standard single door entrance.
OUR GENERATORS with YOUR DISINFECTANT ?
Our FoggerTech machines works with any water-soluble disinfectant because it generates COLD NanoVapour.
Will it work for you?
We service a wide spectrum of clients:
- Food and beverage processing and packing:
- Fresh product packing
- Meat and poultry
- Bakery
- Beer, wine and beverage industries
- Agriculture
- Pesticide or fertilizer distribution in greenhouse tunnels
- Broiler and egg processing facilities
- Pharmaceutical manufacturing facilities
- Public transportation, i.e. buses and taxis
- Truck cabins
- Tanker transport units
- Boarding establishments, hotels and care centres
- Hospitals and clinics
- Laboratories
- General office and storage environments
- Cold and freezer rooms
- Tanks and connected pipelines
- Inside complex equipment
CONTACT US
For any questions, please send an email to:
FoggerTech is owned by Bertus van Schalkwyk CC, established in 1996 (Reg no: 1996/044133/23)
Bertus van Schalkwyk is an innovative engineer, project manager and businessman with a solid track record, living in Somerset West (South Africa) since 1993 where he is active and well known in the community.
In the early years of his career he worked as an electronics design engineer in the high-tech military, aviation and aerospace industry, designing state-of-the-art electronic equipment that were integrated into systems that had to withstand the harshest of environments, including space.
Later he became a Project Manager in the Defence Industry, responsible for contractual and financial matters related to several multi-million Rand projects while managing and motivating in-house teams as well as external contractors to deliver project milestones on time and within budget. This Project Management experience enabled Bertus to do a smooth transition into other sectors of business and industry.
In 2011 he accepted the position as Managing Director of a start-up company, Organic Water Solutions (Pty) Ltd and in 2015 as MD of Sigmacor Construction. He then redirected his energy to his own Project Management company, first focusing on construction (www.amavaprojects.co.za) and then adding electronic and mechanical engineering. (www.amavatech.com).